Chipboard
FSC-certified wood, density 730 kg/m³. Cost-effective solution for offices with moderate loads. Low formaldehyde emission (Class E1).
DIVIO · Materials · Falshpoly
Raised Access Floor Systems
Design, supply, and installation of raised access floors for server rooms, data centers, offices, and control rooms. DIVIO matches the system to your budget and project requirements — from premium Italian Nesite solutions to proven budget systems.
01System
What is a raised access floor
A raised access floor is a modular panel system on adjustable pedestals, creating an underfloor void for engineering services. Panels lift out easily for access to cabling, cooling, and piping without disturbing the finished surface.
02Applications
Where They Are Used
Server Rooms
Underfloor space for cabling, cooling, and rapid access to services without disturbing finishes.
Data Centers
Perforated tiles for cold-aisle air supply, high load classes for heavy equipment racks.
Open-Space Offices
Flexible workspace layouts, concealed power and data cabling, acoustic comfort.
Control Rooms
Access to services without operational downtime, anti-static finishes for sensitive equipment.
Healthcare Facilities
Clean rooms, laboratories, operating theaters. Anti-static properties, hygienic finishes, access to services without compromising sterility.
Airports and Transport
Check-in zones, control towers, VIP lounges. High traffic loads, wear-resistant finishes.
Figures and status
120+
completed projects
Server rooms, data centers, offices across Kazakhstan
12+
years of expertise
In the raised access floor market since 2014
✓
Certified supplier
Direct manufacturer contracts, manufacturer's warranty on materials
Official partner
Nesite (Italy) in Kazakhstan
03Works
What We Do
01
Engineering and Load Calculation
Our engineer calculates loads accounting for racks, equipment, furniture, and dynamic loads. Selects system class and pedestal layout.
02
Matching the System to the Job
There is no single correct raised floor — only the right match between system and project. We select based on budget, load, height, substrate, fire rating, and anti-static requirements.
03
Multi-Vendor Supply
We work with several raised access floor manufacturers. Official partner of Nesite (Italy) in Kazakhstan. Site logistics included in the project.
04
Installation by Certified Crew
In-house installation crew, experience since 2014. Quality control at every stage.
05
Related Works
Equipment access ramps, level transitions between rooms, anti-static finishes, ventilation grilles. We operate as a fit-out general contractor.
06
Warranty and Service
Materials carry the manufacturer's warranty; the term depends on the system. DIVIO installation works — 12 months. Maintenance and system expansion as your facility grows.
Configure a system for your project
Answer a few questions about your space — the configurator selects a raised floor system, computes the material list, and prepares a request for our engineer.
04Panel
How a panel is made
- 01
Core
The structural base — steel sheet with cement infill, calcium sulfate board, or wood core. Determines load class and application.
- 02
Top finish
Surface layer: HPL laminate, porcelain tile, anti-static vinyl, carpet tile, or bare panel for client's own covering.
- 03
Bottom covering
Aluminum foil or steel sheet for moisture protection and improved fire resistance.
- 04
Edge trim
PVC or steel edge banding. Ensures precise panel alignment and protects edges from chipping.
05Structure
Support structure
Adjustable pedestals and stringers form a rigid grid that supports the panels. Each pedestal height is individually set — compensating for substrate irregularities and ensuring a perfectly level floor. Stringers connect pedestals into a unified structure and increase the allowable load class.
- Height adjustment from 30 to 1500 mm
- Stringers for higher load classes
- Compatible with cable trays and air ducts
06Systems
Systems and materials
Panel types
Calcium sulphate
Ultra-high density 1600 kg/m³. Server rooms, data centers, Class A offices. High point load, acoustic performance, environmental compliance. Available in multiple thicknesses.
Sintered (ceramic)
Non-slip ceramic (gres) surface on an inert inorganic base. Maximum density and wear resistance. Airports, museums, public spaces.
Finish options
HPL laminateVinyl (PVC)LinoleumRubberCorkParquetCeramic stonewareNatural stoneTerrazzoGlass
Structure types
MPS
Light/medium load. Height 35–600 mm. Minimum floor lift.
MPL
Open stringers. Maximum stability without bonding pedestals to substrate.
MPM
Open stringers, medium/heavy load. Height 35–1000 mm.
MPH
Closed rectangular stringers. Heavy loads, technical rooms.
BPC
Maximum performance. Closed 50×25 mm stringers, electrical continuity.
TR
Purpose-built for data centres. Heavy-duty pedestals, flexible positioning.
08Questions
Frequently Asked Questions
Technical documentation and catalog
For detailed system specifications, technical drawings, and solutions by facility type, visit our expert resource falshpoly.kz.